WELLS · CROSS-SECTION

2 wells, subsea datum

West to east, 5.1 miles end to end. Depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. Dashed lines join the same normalized formation in neighbouring wells; nothing is interpolated. Where tops come from →

0-1,000-2,000-3,000-4,000SUBSEA FTA1,206 FT ELColeman JunctionBreckenridge LimeGunsightTwin Peaks SandKMAB1,138 FT ELColeman JunctionTannehillSaddle CreekDyson LimeGunsightCastlebury LimeKMASeymour SandAtoka

reported topsame formation, neighbouring wells

The tops, as filed

AWaggoner Erp #1151ER 42-023-31849

Waggoner Operating, L.L.C. · Baylor · 1,206 ft elevation · 6,500 ft TD

FormationMD ftSubsea
Coleman JunctionCOLEMAN JUNCTION - CORROSIVE ZON755451
Breckenridge Lime1,742-536
GunsightGUNSIGHT SAND2,004-798
Twin Peaks Sand4,044-2,838
KMA4,144-2,938

BWaggoner Ero #971ER 42-023-31848

Waggoner Operating, L.L.C. · Baylor · 1,138 ft elevation · 6,500 ft TD

FormationMD ftSubsea
Coleman JunctionCOLEMAN JUNCTION - CORROSIVE ZON543595
TannehillTANNEHILL SAND894244
Saddle Creek1,153-15
Dyson Lime1,535-397
GunsightGUNSIGHT SAND1,880-742
Castlebury Lime2,220-1,082
KMA4,013-2,875
Seymour Sand4,419-3,281
Atoka5,200-4,062

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity and location from the permit record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.