WELLS · CROSS-SECTION
2 wells, measured depth
West to east, 1.1 miles end to end. Shown in measured depth because not every well reports an elevation, so the columns are not datum-aligned. Dashed lines join the same normalized formation in neighbouring wells; nothing is interpolated. Where tops come from →
Add at least two wells with filed tops to draw the section. 2 of these have none on file.
The tops, as filed
AScaling, C.W. et AL #1WD 42-077-02460
Peden, Marshell · Clay · 1,070 ft elevation · 1,100 ft TD
No formation tops on file for this well.
BScaling #1 42-077-35429
B.O.L.D. Oil and Gas, LLC · Clay · no elevation on file · 6,500 ft TD
No formation tops on file for this well.
About this data
Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity and location from the permit record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.
New to these records? completion reports and the wellbore file
Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.