WELLS · CROSS-SECTION

2 wells, subsea datum

West to east, under 0.1 miles end to end. Depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. Dashed lines join the same normalized formation in neighbouring wells; nothing is interpolated. Where tops come from →

-0-500-1,000-1,500-2,000SUBSEA FTA1,943 FT ELColeman JunctionDothan Sand - DisposalNoodle Creek - DisposalFlippen - DisposalCrystal Falls - DisposalBreckenridge - DisposalB1,943 FT ELColeman JunctionDothan Sand - DisposalNoodle Creek - DisposalSaddle CreekFlippen - DisposalCrystal Falls - DisposalHope - DisposalBreckenridge - Disposal

reported topsame formation, neighbouring wells

The tops, as filed

AKral SWD #2 42-151-33266

Patton Exploration, Inc. · Fisher · 1,943 ft elevation · 4,300 ft TD

FormationMD ftSubsea
Coleman JunctionCOLEMAN JUNCTION - CORROSIVE; PO2,615-672
Dothan Sand - Disposal3,115-1,172
Noodle Creek - Disposal3,202-1,259
Flippen - Disposal3,479-1,536
Crystal Falls - Disposal3,554-1,611
Breckenridge - Disposal3,826-1,883

BKral Unit #3H 42-151-33339

Patton Exploration, Inc. · Fisher · 1,943 ft elevation · 7,000 ft TD

FormationMD ftSubsea
Coleman JunctionCOLEMAN JUNCTION - CORROSIVE; PO2,636-693
Dothan Sand - Disposal3,108-1,165
Noodle Creek - Disposal3,222-1,279
Saddle CreekSADDLE CREEK - DISPOSAL3,462-1,519
Flippen - Disposal3,468-1,525
Crystal Falls - Disposal3,556-1,613
Hope - Disposal3,760-1,817
Breckenridge - Disposal3,914-1,971

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity and location from the permit record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.