WELLS · CROSS-SECTION
2 wells, measured depth
West to east, 2.9 miles end to end. Shown in measured depth because not every well reports an elevation, so the columns are not datum-aligned. Dashed lines join the same normalized formation in neighbouring wells; nothing is interpolated. Where tops come from →
reported topsame formation, neighbouring wells
The tops, as filed
ANoble #7 42-237-38567
Swan Production Co. · Jack · 1,200 ft elevation · 6,000 ft TD
| Formation | MD ft | Subsea |
|---|---|---|
| Caddo | 4,260 | -3,060 |
| Marble Falls | 4,650 | -3,450 |
| BarnettBARNETT SHALE | 5,060 | -3,860 |
| Mississippian | 5,133 | -3,933 |
BS.H. Peavy 'D' #3 42-237-40501
JDL Operating, LLC · Jack · no elevation on file · 4,999 ft TD
| Formation | MD ft | Subsea |
|---|---|---|
| Butram | 2,300 | — |
| Strawn | 3,410 | — |
| Bryson | 4,120 | — |
About this data
Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity and location from the permit record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.
New to these records? completion reports and the wellbore file
Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.