WELLS · CROSS-SECTION
2 wells, subsea datum
West to east, 1.7 miles end to end. Depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. Dashed lines join the same normalized formation in neighbouring wells; nothing is interpolated. Where tops come from →
reported topsame formation, neighbouring wells
The tops, as filed
ATom Carpenter Oil Unit 'A' #1 42-237-38230
Mitchell Energy Corporation · Jack · 1,089 ft elevation · 5,800 ft TD
| Formation | MD ft | Subsea |
|---|---|---|
| Caddo | 4,548 | -3,459 |
| Marble Falls | 4,917 | -3,828 |
| MississippianMISS | 5,399 | -4,310 |
BHenderson #S 4 42-237-39491
Swan PC, LP · Jack · 1,186 ft elevation · 6,200 ft TD
| Formation | MD ft | Subsea |
|---|---|---|
| Buttram Sand | 2,888 | -1,702 |
| Strawn | 3,142 | -1,956 |
| JRB Base | 4,718 | -3,532 |
| Caddo | 4,859 | -3,673 |
| Atoka | 5,044 | -3,858 |
| Marble Falls | 5,206 | -4,020 |
| Comyn | 5,560 | -4,374 |
| Barnett | 5,724 | -4,538 |
| Ellenburger | 5,925 | -4,739 |
About this data
Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity and location from the permit record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.
New to these records? completion reports and the wellbore file
Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.