WELLS · CROSS-SECTION
6 wells, subsea datum
West to east, 2.3 miles end to end. Depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. Dashed lines join the same normalized formation in neighbouring wells; nothing is interpolated. Where tops come from →
reported topsame formation, neighbouring wellscrowded tops are unlabelled; hover a tick to read it
The tops, as filed
AWorthington #13 42-237-40534
Oakridge Oil and Gas, LP · Jack · 944 ft elevation · 3,000 ft TD
| Formation | MD ft | Subsea |
|---|---|---|
| Palo Pinto | 1,210 | -266 |
| Capps Lime | 1,900 | -956 |
| Weir | 2,110 | -1,166 |
BWorthington D #3 42-237-40246
Oakridge Oil and Gas, LP · Jack · 956 ft elevation · 6,500 ft TD
| Formation | MD ft | Subsea |
|---|---|---|
| Strawn | 3,166 | -2,210 |
| Caddo | 4,793 | -3,837 |
CWorthington #11 42-237-40166
Oakridge Oil and Gas, LP · Jack · 916 ft elevation · 6,500 ft TD
| Formation | MD ft | Subsea |
|---|---|---|
| Caddo | 4,855 | -3,939 |
DEdwards-Worthington #2 42-237-39803
Oakridge Oil and Gas, LP · Jack · 925 ft elevation · 6,500 ft TD
| Formation | MD ft | Subsea |
|---|---|---|
| Palo Pinto | 1,270 | -345 |
| Village Bend | 1,460 | -535 |
| Weir | 2,163 | -1,238 |
| Strawn | 3,169 | -2,244 |
| Caddo | 4,881 | -3,956 |
| AtokaATOKA CONGLOMERATE | 5,154 | -4,229 |
| Atoka | 5,154 | -4,229 |
| BendBEND CONGL | 5,186 | -4,261 |
| Marble Falls | 5,331 | -4,406 |
EWorthington #3 42-237-39567
Oakridge Oil and Gas, LP · Jack · 1,010 ft elevation · 6,500 ft TD
| Formation | MD ft | Subsea |
|---|---|---|
| Caddo | 4,955 | -3,945 |
| Marble Falls | 5,540 | -4,530 |
| EllenburgerELLENBERGER | 6,185 | -5,175 |
FEdwards-Worthington 6 #6 42-237-40230
Oakridge Oil and Gas, LP · Jack · 918 ft elevation · 6,500 ft TD
| Formation | MD ft | Subsea |
|---|---|---|
| Caddo | 4,860 | -3,942 |
About this data
Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity and location from the permit record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.
New to these records? completion reports and the wellbore file
Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.