WELLS · CROSS-SECTION
2 wells, measured depth
West to east, 0.2 miles end to end. Shown in measured depth because not every well reports an elevation, so the columns are not datum-aligned. Dashed lines join the same normalized formation in neighbouring wells; nothing is interpolated. Where tops come from →
reported topsame formation, neighbouring wellscrowded tops are unlabelled; hover a tick to read it
The tops, as filed
AZeman-State A9 #6H 42-389-40397
Callon (Permian) LLC · Reeves · no elevation on file · 12,500 ft TD
| Formation | MD ft | Subsea |
|---|---|---|
| Delaware | 4,519 | — |
| DelawareFORD / DELAWARE | 4,519 | — |
| Bell Canyon | 4,552 | — |
| Cherry Canyon | 5,515 | — |
| Bone Spring | 8,132 | — |
| Wolfcamp | 10,411 | — |
BZeman-State A10 #11UA 42-389-40407
Callon (Permian) LLC · Reeves · no elevation on file · 11,000 ft TD
| Formation | MD ft | Subsea |
|---|---|---|
| DelawareFORD / DELAWARE | 4,515 | — |
| Delaware | 4,515 | — |
| Bell Canyon | 4,559 | — |
| Cherry Canyon | 5,512 | — |
| Bone Spring | 8,057 | — |
| Wolfcamp | 10,405 | — |
About this data
Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity and location from the permit record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.
New to these records? completion reports and the wellbore file
Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.