WELLS · CROSS-SECTION

2 wells, measured depth

West to east, 0.5 miles end to end. Shown in measured depth because not every well reports an elevation, so the columns are not datum-aligned. Dashed lines join the same normalized formation in neighbouring wells; nothing is interpolated. Where tops come from →

Add at least two wells with filed tops to draw the section. 1 of these have none on file.

The tops, as filed

TEP Barnett USA, LLC · Tarrant · no elevation on file · 9,000 ft TD

No formation tops on file for this well.

BHart #1H 42-439-33815

TEP Barnett USA, LLC · Tarrant · 560 ft elevation · 9,000 ft TD

FormationMD ftSubsea
AtokaATOKA LIME8,206-7,646
AtokaBASAL ATOKA8,681-8,121
BarnettUPPER BARNETT8,746-8,186

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity and location from the permit record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.