TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.6 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,5001,000500-0-500-1,000SUBSEA FTA3,144 FT ELB3,143 FT ELRed BedsRed BedsYatesYatesSeven RiversSeven RiversQueenQueenQueen AQueen AQueen BQueen BGrayburgGrayburgLower GrayburgLower GrayburgSan Andres - CO2 Flood,…San Andres - CO2 Flood, High Flo

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AMeans San Andres Unit #6616W
  • BMeans San Andres Unit #6520W
FormationAB
Red Beds1,514 MD 1,6301,503 MD 1,640
Rustler—1,380 MD 1,763
Salado—1,183 MD 1,960
Tansill—404 MD 2,739
Yates266 MD 2,878331 MD 2,812
Seven Rivers87 MD 3,057152 MD 2,991
Queen-552 MD 3,696-487 MD 3,630
Queen A-861 MD 4,005-770 MD 3,913
Queen B-876 MD 4,020-783 MD 3,926
Grayburg-896 MD 4,040-803 MD 3,946
Lower Grayburg-1,096 MD 4,240-971 MD 4,114
San Andres - CO2 Flood, High Flo-1,228 MD 4,372-1,118 MD 4,261
San Andres-1,230 MD 4,374—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.