WELLS · CROSS-SECTION

2 wells, subsea datum

West to east, 0.5 miles end to end. Depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. Dashed lines join the same normalized formation in neighbouring wells; nothing is interpolated. Where tops come from →

-0-2,000-4,000-6,000-8,000-10,000SUBSEA FTA3,026 FT ELYatesSeven RiversGrayburgQueenSan AndresGlorietaWoodfordDevonianFusselmanMontoyaSimpsonEllenburgerB3,016 FT ELYatesSeven RiversQueenSan AndresGlorietaClear ForkSan AngeloWichita-AlbanySpraberryLeonardWolfcampStrawnDevonian

reported topsame formation, neighbouring wells

The tops, as filed

AButler -A- #1 42-003-35944

Tamarack Petroleum Company, Inc. · Andrews · 3,026 ft elevation · 13,850 ft TD

FormationMD ftSubsea
Yates3,220-194
Seven Rivers3,473-447
Grayburg4,490-1,464
Queen4,710-1,684
San AndresSAN ANDRES - CO2 FLOOD, HIGH FLO4,865-1,839
Glorieta5,724-2,698
WoodfordTOP-WOODFORD12,442-9,416
DevonianTOP-DEVONIAN12,570-9,544
FusselmanTOP-FUSSLEMAN13,236-10,210
MontoyaTOP-MONTOYA13,434-10,408
SimpsonTOP-SIMPSON13,640-10,614
EllenburgerTOP-ELLENBURGER13,771-10,745

BMaria #7 42-165-38111

Copper Ridge Resources LLC · Gaines · 3,016 ft elevation · 13,800 ft TD

FormationMD ftSubsea
YatesYATES - OVERPRESSURE, INERT GAS3,220-204
Seven Rivers3,500-484
Queen4,000-984
San AndresSAN ANDRES - ACTIVE CO2 FLOOD4,930-1,914
Glorieta6,108-3,092
Clear ForkCLEARFORK6,549-3,533
San Angelo6,600-3,584
Wichita-AlbanyWICHITA ALBANY7,000-3,984
Spraberry7,870-4,854
Leonard8,000-4,984
Wolfcamp9,715-6,699
Strawn10,780-7,764
Devonian12,606-9,590

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity and location from the permit record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.