TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-1,000-2,000-3,000-4,000SUBSEA FTA2,949 FT ELB2,948 FT ELYatesYatesSeven RiversSeven RiversGrayburgGrayburgSan AndresSan AndresQueenQueenHoltHoltGlorietaGlorietaTubbTubbClear ForkClear ForkPermian (undifferentiat…Permian (undifferentiated)

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AMabee 240C X19 #2307MH
  • BMabee 240C X16 #2306LH
FormationAB
Yates449 MD 2,500448 MD 2,500
Seven Rivers-51 MD 3,000-52 MD 3,000
Grayburg-151 MD 3,100-152 MD 3,100
Queen-1,206 MD 4,155-1,202 MD 4,150
Holt-2,051 MD 5,000-2,052 MD 5,000
San Andres-2,150 MD 5,099SAN ANDRES - CO2 FLOOD, HIGH FLO-752 MD 3,700SAN ANDRES - CO2 FLOOD, HIGH FLO
Glorieta-2,511 MD 5,460-2,506 MD 5,454
Tubb-2,811 MD 5,760-2,806 MD 5,754
Clear Fork-3,927 MD 6,876-3,922 MD 6,870
Permian (undifferentiated)-4,227 MD 7,176PERMIAN DETRITAL-4,222 MD 7,170PERMIAN DETRITAL

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.