TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.2 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-1,000-2,000-3,000-4,000SUBSEA FTA2,951 FT ELB2,949 FT ELYatesYatesSeven RiversSeven RiversGrayburgGrayburgQueenQueenHoltHoltSan AndresSan AndresGlorietaGlorietaTubbTubbClear ForkClear ForkPermian (undifferentiat…Permian (undifferentiated)

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AMabee 240C X24 #2312SH
  • BMabee 240C X19 #2307MH
FormationAB
Yates451 MD 2,500449 MD 2,500
Seven Rivers-49 MD 3,000-51 MD 3,000
Queen-1,209 MD 4,160-1,206 MD 4,155
Grayburg-1,409 MD 4,360-151 MD 3,100
San Andres-2,153 MD 5,104SAN ANDRES - CO2 FLOOD, HIGH FLO-2,150 MD 5,099SAN ANDRES - CO2 FLOOD, HIGH FLO
Holt-2,353 MD 5,304-2,051 MD 5,000
Glorieta-2,514 MD 5,465-2,511 MD 5,460
Tubb-2,814 MD 5,765-2,811 MD 5,760
Clear Fork-3,930 MD 6,881-3,927 MD 6,876
Permian (undifferentiated)-4,130 MD 7,081PERMIAN DETRITAL-4,227 MD 7,176PERMIAN DETRITAL

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.