TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.3 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-1,000-2,000-3,000-4,000-5,000SUBSEA FTA2,927 FT ELB2,926 FT ELSeven RiversSeven RiversYatesYatesQueenQueenGrayburgGrayburgSan AndresSan AndresHoltHoltGlorietaGlorietaTubbTubbClear ForkClear ForkPermian (undifferentiat…Permian (undifferentiated)

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AFee 'BN' #2311
  • BFee 'BN' #2314
FormationAB
Seven Rivers-73 MD 3,000-74 MD 3,000
Yates-273 MD 3,200-274 MD 3,200
Queen-1,873 MD 4,800-1,874 MD 4,800
Grayburg-1,974 MD 4,901-1,894 MD 4,820
Holt-2,573 MD 5,500-2,574 MD 5,500
San Andres-2,615 MD 5,542SAN ANDRES - CO2 FLOOD, HIGH FLO-2,374 MD 5,300SAN ANDRES - CO2 FLOOD, HIGH FLO
Glorieta-3,073 MD 6,000-3,074 MD 6,000
Tubb-3,373 MD 6,300-3,374 MD 6,300
Clear Fork-4,673 MD 7,600-4,674 MD 7,600
Permian (undifferentiated)-4,973 MD 7,900PERMIAN DETRITAL-4,974 MD 7,900PERMIAN DETRITAL

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.