TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-1,000-2,000-3,000-4,000SUBSEA FTA2,954 FT ELB2,952 FT ELYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresHoltHoltGlorietaGlorietaClear ForkClear ForkTubbTubbPermian (undifferentiat…Permian (undifferentiated)

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AMabee Dda B5 #2608SH
  • BMabee Dda B1 #2604SH
FormationAB
Yates-153 MD 3,107-152 MD 3,104
Seven Rivers-353 MD 3,307-352 MD 3,304
Queen-932 MD 3,886-931 MD 3,883
Grayburg-1,132 MD 4,086-1,131 MD 4,083
San Andres-1,842 MD 4,796SAN ANDRES - CO2 FLOOD, HIGH FLO-1,841 MD 4,793SAN ANDRES - CO2 FLOOD, HIGH FLO
Holt-2,042 MD 4,996-2,041 MD 4,993
Glorieta-2,600 MD 5,554-2,599 MD 5,551
Clear Fork-3,988 MD 6,942-3,987 MD 6,939
Tubb-4,288 MD 7,242-4,287 MD 7,239
Permian (undifferentiated)-4,588 MD 7,542PERMIAN DETRITAL-4,587 MD 7,539PERMIAN DETRITAL

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.