TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-1,000-2,000-3,000-4,000SUBSEA FTA2,955 FT ELB2,954 FT ELYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresHoltHoltGlorietaGlorietaClear ForkClear ForkTubbTubbPermian (undifferentiat…Permian (undifferentiated)

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AMabee Dda B8 #2610SH
  • BMabee Dda B5 #2608SH
FormationAB
Yates-160 MD 3,115-153 MD 3,107
Seven Rivers-360 MD 3,315-353 MD 3,307
Queen-939 MD 3,894-932 MD 3,886
Grayburg-1,139 MD 4,094-1,132 MD 4,086
San Andres-1,849 MD 4,804SAN ANDRES - CO2 FLOOD, HIGH FLO-1,842 MD 4,796SAN ANDRES - CO2 FLOOD, HIGH FLO
Holt-2,049 MD 5,004-2,042 MD 4,996
Glorieta-2,607 MD 5,562-2,600 MD 5,554
Clear Fork-3,995 MD 6,950-3,988 MD 6,942
Tubb-4,295 MD 7,250-4,288 MD 7,242
Permian (undifferentiated)-4,595 MD 7,550PERMIAN DETRITAL-4,588 MD 7,542PERMIAN DETRITAL

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.