TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.7 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-1,000-2,000-3,000-4,000-5,000SUBSEA FTA2,969 FT ELB2,958 FT ELSeven RiversSeven RiversYatesYatesQueenQueenGrayburgGrayburgHoltHoltSan AndresSan AndresGlorietaGlorietaTubbTubbClear ForkClear ForkPermian (undifferentiat…Permian (undifferentiated)

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AFee 'BN' #2301
  • BFee 'BN' #2201
FormationAB
Seven Rivers-31 MD 3,000-42 MD 3,000
Yates-231 MD 3,200-102 MD 3,060
Queen-1,831 MD 4,800-812 MD 3,770
Grayburg-1,952 MD 4,921-1,932 MD 4,890
Holt-2,531 MD 5,500-2,542 MD 5,500
San Andres-2,788 MD 5,757SAN ANDRES - CO2 FLOOD, HIGH FLO-2,572 MD 5,530SAN ANDRES - CO2 FLOOD, HIGH FLO
Glorieta-3,031 MD 6,000-3,042 MD 6,000
Tubb-3,331 MD 6,300-3,342 MD 6,300
Clear Fork-4,631 MD 7,600-4,642 MD 7,600
Permian (undifferentiated)-4,931 MD 7,900PERMIAN DETRITAL-4,942 MD 7,900PERMIAN DETRITAL

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.