TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 1.9 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000SUBSEA FTA2,350 FT ELB2,335 FT EL

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AReinecke Unit #97
  • BShafer 32-12 B Unit #A 6H
FormationAB
Santa Rosa—1,954 MD 381SANTA ROSA - GAU PROTECTION
Rustler—1,509 MD 826RUSTLER - GAU PROTECTION
Yates—1,163 MD 1,172
Seven Rivers—1,041 MD 1,294
San Andres—6 MD 2,329SAN ANDRES - HIGH FLOWS, H2S, CO
Clear Fork—-896 MD 3,231
Spraberry—-2,222 MD 4,557
Leonard—-3,190 MD 5,525LEONARD LIME
Dean—-3,466 MD 5,801
Wolfcamp-3,936 MD 6,286—
Cisco-4,187 MD 6,537CISCO/CANYON—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.