TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000SUBSEA FTA2,394 FT ELB2,394 FT ELSanta RosaSanta RosaRustlerRustlerYatesYatesSan AndresSan AndresClear ForkClear ForkSpraberrySpraberryDeanDeanWolfcampWolfcamp

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AGriffin 48-37 Unit A #2H
  • BGriffin 48-37 Unit A #1H
FormationAB
Santa Rosa1,994 MD 400SANTA ROSA - GAU PROTECTION1,994 MD 400SANTA ROSA - GAU PROTECTION
Rustler1,427 MD 967RUSTLER - GAU PROTECTION1,994 MD 400RUSTLER - GAU PROTECTION
Yates913 MD 1,481922 MD 1,472
San Andres-182 MD 2,576SAN ANDRES - HIGH FLOWS, H2S, CO-181 MD 2,575SAN ANDRES - HIGH FLOWS, H2S, CO
Clear Fork-839 MD 3,233-840 MD 3,234
Spraberry-2,649 MD 5,043-2,657 MD 5,051
Dean-3,881 MD 6,275-3,898 MD 6,292
Wolfcamp-4,021 MD 6,415WOLFCAMP - STRONG WATER FLOWS-4,037 MD 6,431WOLFCAMP - STRONG WATER FLOWS

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.