TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.8 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000SUBSEA FTA2,266 FT ELB2,288 FT ELSanta RosaSanta RosaRustlerRustlerYatesYatesSeven RiversSeven RiversSan AndresSan AndresClear ForkClear ForkSpraberrySpraberryLeonardLeonard

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AGriffin-JBT 67-53 a Unit #L 2H
  • BBuchanan 68-54 B Unit #A 5H
FormationAB
Santa Rosa1,855 MD 411SANTA ROSA - GAU PROTECTION1,890 MD 398SANTA ROSA - GAU PROTECTION
Rustler1,451 MD 815RUSTLER - GAU PROTECTION1,498 MD 790RUSTLER - GAU PROTECTION
Yates1,051 MD 1,2151,134 MD 1,154
Seven Rivers961 MD 1,3051,000 MD 1,288
San Andres-24 MD 2,290SAN ANDRES - HIGH FLOWS, H2S, CO48 MD 2,240SAN ANDRES - HIGH FLOWS, H2S, CO
Clear Fork-755 MD 3,021-705 MD 2,993
Spraberry-2,201 MD 4,467-2,039 MD 4,327
Leonard-3,321 MD 5,587LEONARD LIME-3,217 MD 5,505LEONARD LIME
Dean—-3,542 MD 5,830

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.