TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 2.6 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-2,000-4,000-6,000-8,000-10,000-12,000SUBSEA FTA24 FT ELB47 FT ELAlibelAlibel

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AHouston Farms Dev. #1
  • BOld #5
FormationAB
Caprock—-1,153 MD 1,200CAPROCK - DISPOSAL
Miocene (undifferentiated)—-1,253 MD 1,300MIOCENE - DISPOSAL
Otis - Disposal—-2,953 MD 3,000
Oligocene - Disposal—-7,268 MD 7,315
Het Lime - Disposal—-7,971 MD 8,018
Frio - Disposal—-8,661 MD 8,708
Frio Upper—-8,784 MD 8,831
Frio A—-8,786 MD 8,833
Grubbs-8,836 MD 8,860—
Alibel-9,111 MD 9,135-9,297 MD 9,344
Alibel Stray—-9,298 MD 9,345
Upper Houston Farms-9,331 MD 9,355—
McKelvey-9,729 MD 9,753—
Ho. Fms. UP—-9,753 MD 9,800
Ho. Fms. Up.—-9,753 MD 9,800
Lower Houston Farms-9,821 MD 9,845—
Ho.fms. VI-A-Z—-10,118 MD 10,165
Banfield—-10,735 MD 10,782
Wieting, LO—-11,333 MD 11,380
Wieting—-11,333 MD 11,380
Frio S—-11,801 MD 11,848
Frio Sand—-11,801 MD 11,848
Andrau—-12,074 MD 12,121

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.