TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.5 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-2,000-4,000-6,000-8,000-10,000SUBSEA FTA441 FT ELB417 FT ELNacatochNacatochSub-ClarksvilleSub-ClarksvilleWoodbineWoodbinePaluxyPaluxyGlen RoseGlen RoseRodessaRodessaJames LimeJames LimePettitPettitTravis PeakTravis PeakCotton ValleyCotton Valley

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AMcGill-Burke a (AW) #1H
  • BNorthcutt-Burke a (AW) #1H
FormationAB
Nacatoch-2,086 MD 2,527-2,098 MD 2,515
Sub-Clarksville-3,628 MD 4,069-3,612 MD 4,029
Woodbine-3,651 MD 4,092-3,628 MD 4,045
Paluxy-5,287 MD 5,728-5,278 MD 5,695
Glen Rose-5,581 MD 6,022-5,538 MD 5,955
Rodessa-7,215 MD 7,656-7,405 MD 7,822
James Lime-7,673 MD 8,114-7,636 MD 8,053
Pettit-7,803 MD 8,244PETTET-7,864 MD 8,281
Pettit—-7,864 MD 8,281
Travis Peak-8,170 MD 8,611-8,058 MD 8,475
Cotton Valley-10,076 MD 10,517-10,018 MD 10,435

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.