TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 2.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-1,000-2,000-3,000-4,000-5,000SUBSEA FTA1,014 FT ELB1,061 FT ELCiscoCiscoGunsightGunsight

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ARare Earth-Briscoe #L 2
  • BBlalack #3
FormationAB
Cisco414 MD 600CISCO SERIES797 MD 264CISCO SERIES
Gunsight164 MD 850GUNSIGHT SAND225 MD 836GUNSIGHT SAND
Thomas Sand—-43 MD 1,104
Strawn—-1,331 MD 2,392STRAWN SAND
Canyon—-1,341 MD 2,402
Weir—-2,163 MD 3,224
Mobley Sand—-3,151 MD 4,212
Bryson—-3,788 MD 4,849
Caddo—-4,237 MD 5,298
Conglomerate—-4,591 MD 5,652
Marble Falls—-4,651 MD 5,712
Ellenburger—-5,137 MD 6,198

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.