TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 6.9 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000500-0-500-1,000SUBSEA FTA1,950 FT ELB1,761 FT ELColeman JunctionColeman JunctionWinchell Lime - DisposalWinchell Lime - Disposal

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AWilson Ranch #1
  • BHemphill 83 #7
FormationAB
Coleman Junction1,196 MD 7541,136 MD 625
Tannehill670 MD 1,280TANNEHILL - DISPOSAL—
Winchell Lime - Disposal-300 MD 2,250-199 MD 1,960
Crosscut Upper - Disposal—-653 MD 2,414
Coleman Lake (Morris)—-654 MD 2,415
Morris Sand—-758 MD 2,519
Capps Lime - Disposal-918 MD 2,868—
Gardner Sand—-1,029 MD 2,790
Gray—-1,230 MD 2,991

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.