TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.3 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

2,0001,5001,000500-0-500-1,000-1,500SUBSEA FTA2,672 FT ELB2,669 FT ELRustlerRustlerYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresJudkinsJudkinsMcKnightMcKnightSan AngeloSan AngeloClear ForkClear Fork

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AWaddell TR A #3204
  • BWaddell TR C #3206
FormationAB
Rustler2,187 MD 4852,156 MD 513
Yates1,189 MD 1,4831,144 MD 1,525
Seven Rivers992 MD 1,680957 MD 1,712
Queen464 MD 2,208417 MD 2,252
Grayburg193 MD 2,479GRAYBURG - ACTIVE CO2 FLOOD174 MD 2,495GRAYBURG - ACTIVE CO2 FLOOD
San Andres9 MD 2,663SAN ANDRES - USABLE QUALITY WATE-28 MD 2,697SAN ANDRES - USABLE QUALITY WATE
Judkins-177 MD 2,849-178 MD 2,847
McKnight-454 MD 3,126-505 MD 3,174
San Angelo-801 MD 3,473-849 MD 3,518
Clear Fork-1,271 MD 3,943-1,352 MD 4,021
Tubb-1,634 MD 4,306—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.