TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.2 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000SUBSEA FTA3,470 FT ELB3,467 FT ELLamarLamarCherry CanyonCherry CanyonAvalonAvalonFirst Bone Spring Sands…First Bone Spring Sandstone

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ADr State Wise Unit 1 #0022WA
  • BDr State Wise Unit 1 #2012WC
FormationAB
Lamar1,747 MD 1,7231,727 MD 1,740
Bell Canyon1,709 MD 1,761BELL CANYON SANDSTONE—
Bell—1,685 MD 1,782
Cherry Canyon801 MD 2,669CHERRY CANYON SANDSTONE794 MD 2,673
Brushy Canyon-243 MD 3,713BRUSHY CANYON SANDSTONE—
Avalon-1,862 MD 5,332AVALON SHALE-919 MD 4,386
Avalon Lower—-2,350 MD 5,817
First Bone Spring Sandstone-2,714 MD 6,184-1,843 MD 5,310
Second Bone Spring Sandstone-3,127 MD 6,597—
Second Bone Spring-3,127 MD 6,597—
Third Bone Spring Sandstone-4,435 MD 7,905—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.