TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

2,0001,000-0-1,000-2,000-3,000SUBSEA FTA3,671 FT ELB3,671 FT ELLamarLamarBell CanyonBell CanyonCherry CanyonCherry CanyonBrushy CanyonBrushy CanyonAvalonAvalonFirst BonespringFirst BonespringBone SpringsBone SpringsSecond BonespringSecond BonespringWolfcampWolfcamp

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ATaylor Ranch State Unit #0022WA
  • BTaylor Ranch State Unit #0025WA
FormationAB
Lamar2,627 MD 1,0442,625 MD 1,046
Bell Canyon2,591 MD 1,0802,590 MD 1,081
Cherry Canyon1,708 MD 1,9631,685 MD 1,986
Cherry Canyon—1,685 MD 1,986
Brushy Canyon651 MD 3,020650 MD 3,021
Avalon-980 MD 4,651-1,009 MD 4,680
First Bonespring-1,792 MD 5,463-1,810 MD 5,481
Bone Springs-1,792 MD 5,463-2,211 MD 5,882
Third Bonespring-3,385 MD 7,056—
Second Bonespring-2,150 MD 5,821-3,392 MD 7,063
Wolfcamp-3,722 MD 7,393-3,751 MD 7,422

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.