TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 1.7 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

2,0001,000-0-1,000-2,000-3,000-4,000SUBSEA FTA3,724 FT ELB3,671 FT ELLamarLamarBell CanyonBell CanyonCherry CanyonCherry CanyonBrushy CanyonBrushy CanyonBone Spring LimeBone Spring LimeAvalonAvalonBone SpringBone SpringBone Spring 2Bone Spring 2

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ADr State Wise Unit 1 #0345TB
  • BDr SWD 27 #1
FormationAB
Delaware2,531 MD 1,193—
Lamar2,531 MD 1,1932,397 MD 1,274LAMAR LIMESTONE
Bell Canyon2,501 MD 1,2232,357 MD 1,314BELL CANYON SANDSTONE
Cherry Canyon1,633 MD 2,0911,471 MD 2,200CHERRY CANYON SANDSTONE
Brushy Canyon624 MD 3,100501 MD 3,170BRUSHY CANYON SANDSTONE
Bone Spring Lime-981 MD 4,705-1,140 MD 4,811
Avalon-1,104 MD 4,828UPPER AVALON-1,265 MD 4,936AVALON SHALE
Bone Spring-981 MD 4,705-2,013 MD 5,684
Bone Spring 2-2,307 MD 6,031-2,443 MD 6,114
Wolfcamp—-3,968 MD 7,639

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.