TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.5 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000-8,000SUBSEA FTA2,876 FT ELB2,870 FT ELSpraberrySpraberryWolfcampWolfcampStrawnStrawn

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • APeters '20' #2
  • BPeters '25' #1
FormationAB
Yates201 MD 2,675—
San Andres-2,224 MD 5,100—
Clear Fork-4,749 MD 7,625—
Spraberry-4,914 MD 7,790-4,905 MD 7,775
Lower Spraberry—-5,445 MD 8,315
Wolfcamp-7,174 MD 10,050-7,130 MD 10,000UPPER WOLFCAMP
Wolfcamp Lower-7,174 MD 10,050—
Strawn-7,749 MD 10,625-7,800 MD 10,670
Strawn Lime—-8,005 MD 10,875

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.