TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 7.6 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000SUBSEA FTA2,924 FT ELB2,771 FT ELYatesYatesSan AndresSan AndresSpraberrySpraberryDeanDeanWolfcampWolfcamp

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AJeter 27 #3
  • BPatricia '31' #3601
FormationAB
Yates834 MD 2,090-46 MD 2,817
San Andres-781 MD 3,705SAN ANDRES - ACTIVE CO2 FLOOD; H-790 MD 3,561SAN ANDRES - ACTIVE CO2 FLOOD; H
Spraberry-3,882 MD 6,806-3,619 MD 6,390
Dean-5,174 MD 8,098-5,023 MD 7,794
Wolfcamp-5,276 MD 8,200-5,209 MD 7,980
Canyon-5,641 MD 8,565—
Pennsylvanian-5,668 MD 8,592—
Mississippian-7,492 MD 10,416—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.