TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.8 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-1,000-2,000-3,000-4,000-5,000-6,000-7,000SUBSEA FTA857 FT ELB841 FT ELCaddo LimeCaddo LimeConglomerateConglomerateMarble Falls LimestoneMarble Falls LimestoneForestbergForestbergUpper Barnett ShaleUpper Barnett Shale

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ALea AH4 #4
  • BLangley AH1 #1
FormationAB
Caddo-5,297 MD 6,154—
Caddo Lime-5,295 MD 6,152-5,368 MD 6,209
Bend-5,493 MD 6,350BEND CONGLOMERATE—
Conglomerate-5,506 MD 6,363-5,545 MD 6,386
Marble Falls-6,583 MD 7,440—
Marble Falls Limestone-6,553 MD 7,410-6,599 MD 7,440
Barnett Shale-6,755 MD 7,612—
Forestburg-6,923 MD 7,780FORESTBURG LIME—
Forestberg-6,950 MD 7,807-6,974 MD 7,815
Lower Barnett Shale (Top)-7,128 MD 7,985—
Upper Barnett Shale-6,726 MD 7,583-7,296 MD 8,137BARNETT SHALE

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.