WELLS · CROSS-SECTION

2 wells, subsea datum

West to east, under 0.1 miles end to end. Depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. Dashed lines join the same normalized formation in neighboring wells; nothing is interpolated. Where tops come from →

-0-1,000-2,000-3,000-4,000-5,000-6,000SUBSEA FTA621 FT ELEscondidoOlmosSan MiguelAnacachoAustin ChalkEagle FordB621 FT ELEscondidoOlmosSan MiguelAnacachoAustin ChalkEagle Ford

reported topsame formation, neighboring wells

The tops, as filed

ACmww HC3 Dim #A 2H 42-127-38151

Chesapeake Operating, L.L.C. · Dimmit · 621 ft elevation · 9,000 ft TD

FormationMD ftSubsea
EscondidoESCONDIDO - DISPOSAL2,579-1,958
OlmosOLMOS - DISPOSAL3,534-2,913
San MiguelSAN MIGUEL - H2S4,781-4,160
Anacacho5,666-5,045
Austin ChalkAUSTIN CHALK - H2S6,062-5,441
Eagle FordEAGLE FORD - H2S6,629-6,008

Chesapeake Operating, L.L.C. · Dimmit · 621 ft elevation · 9,000 ft TD

FormationMD ftSubsea
EscondidoESCONDIDO - DISPOSAL2,582-1,961
OlmosOLMOS - DISPOSAL3,535-2,914
San MiguelSAN MIGUEL - H2S4,785-4,164
Anacacho5,760-5,139
Austin ChalkAUSTIN CHALK - H2S6,089-5,468
Eagle FordEAGLE FORD - H2S6,642-6,021

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity and location from the permit record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.