TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 1.4 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

0-2,000-4,000-6,000SUBSEA FTA2,860 FT ELB2,856 FT ELLower ClearforkLower Clearfork

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AAndy #18
  • BSallie 13 #19H
FormationAB
Santa Rosa—1,436 MD 1,420SANTA ROSA BASE
Yates—91 MD 2,765
Seven Rivers—-274 MD 3,130
Queen—-1,318 MD 4,174
Grayburg—-1,773 MD 4,629
San Andres—-1,996 MD 4,852SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta—-2,492 MD 5,348
Spraberry-4,589 MD 7,449LOWER SPRABERRY—
Lower Clearfork-5,192 MD 8,052-4,211 MD 7,067
Lower Clear Fork-5,192 MD 8,052—
Wolfcamp-6,274 MD 9,134UPPER WOLFCAMP—
Strawn-7,300 MD 10,160—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.