TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.6 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000SUBSEA FTA2,958 FT ELB2,945 FT ELSanta RosaSanta RosaYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgHoltHoltSan AndresSan AndresGlorietaGlorietaTubbTubbClear ForkClear Fork

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ARatliff K Unit #4408MH
  • BRatliff J Unit #4404JH
FormationAB
Santa Rosa1,606 MD 1,352SANTA ROSA BASE1,595 MD 1,350SANTA ROSA BASE
Yates956 MD 2,002-194 MD 3,139
Seven Rivers-1,013 MD 3,971-435 MD 3,380
Queen-1,288 MD 4,246-1,114 MD 4,059
Grayburg-593 MD 3,551-1,556 MD 4,501
Holt-2,048 MD 5,006-2,055 MD 5,000
San Andres-445 MD 3,403SAN ANDRES - HIGH FLOWS, H2S, CO-2,151 MD 5,096SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-2,616 MD 5,574-2,695 MD 5,640
Tubb-3,144 MD 6,102-3,155 MD 6,100
Clear Fork-4,392 MD 7,350-4,471 MD 7,416

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.