TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 2.7 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,5001,000500-0-500-1,000SUBSEA FTA3,033 FT ELB2,995 FT ELSanta RosaSanta RosaYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan Andres

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ARhodes Cowden Unit #692
  • BBarrow A #3
FormationAB
Santa Rosa1,938 MD 1,095SANTA ROSA BASE1,395 MD 1,600SANTA ROSA BASE
Yates173 MD 2,860135 MD 2,860
Seven Rivers-72 MD 3,105-111 MD 3,106
Queen-931 MD 3,964-961 MD 3,956
Grayburg-1,037 MD 4,070-1,163 MD 4,158
San Andres - High Flows, H2S, Co—-1,361 MD 4,356
San Andres-1,437 MD 4,470SAN ANDRES - HIGH FLOWS, H2S, CO-1,361 MD 4,356

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.