TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.5 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000-5,000SUBSEA FTA2,925 FT ELB2,925 FT ELYatesYatesGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear Fork

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AMillard 'D' #23
  • BMillard 'D' #103
FormationAB
Rustler1,981 MD 944—
Yates765 MD 2,160801 MD 2,124
Seven Rivers—580 MD 2,345
Queen—17 MD 2,908
Grayburg-193 MD 3,118-302 MD 3,227
San Andres-610 MD 3,535-521 MD 3,446SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-1,473 MD 4,398-1,433 MD 4,358
Clear Fork-1,793 MD 4,718-1,830 MD 4,755
Tubb—-2,450 MD 5,375
Wichita-Albany-2,854 MD 5,779WICHITA ALBANY—
Wolfcamp-3,875 MD 6,800—
Devonian-4,167 MD 7,092—
Silurian (undifferentiated)-4,206 MD 7,131SILURIAN—
Fusselman-4,430 MD 7,355—
Montoya-4,534 MD 7,459—
Simpson-4,741 MD 7,666—
Tulip Creek-4,927 MD 7,852—
McKee-5,050 MD 7,975MCKEE SAND—
Waddel Sand-5,313 MD 8,238—
Joins-5,562 MD 8,487—
Ellenburger-5,611 MD 8,536—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.