TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 1.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

2,0001,000-0-1,000-2,000SUBSEA FTA2,944 FT ELB2,952 FT ELSanta RosaSanta RosaRustlerRustlerTansillTansillYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresSan Andres - High Flows…San Andres - High Flows, H2S, CoHoltHoltGlorietaGlorieta

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AShoe Bar Ranch #1CS
  • BShoe Bar Ranch #3CS
FormationAB
Santa Rosa2,087 MD 857SANTA ROSA BASE2,113 MD 839SANTA ROSA BASE
Rustler1,744 MD 1,2001,780 MD 1,172
Tansill510 MD 2,434561 MD 2,391
Yates341 MD 2,603395 MD 2,557
Seven Rivers54 MD 2,890121 MD 2,831
Queen-559 MD 3,503-514 MD 3,466
Grayburg-938 MD 3,882-878 MD 3,830
San Andres-1,144 MD 4,088-1,090 MD 4,042
San Andres - High Flows, H2S, Co-1,144 MD 4,088-1,090 MD 4,042
Holt-2,015 MD 4,959-1,953 MD 4,905
Glorieta-2,202 MD 5,146-2,133 MD 5,085

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.