TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 1.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-1,000-2,000-3,000-4,000SUBSEA FTA2,055 FT ELB2,090 FT ELColeman JunctionColeman JunctionNoodle Creek - DisposalNoodle Creek - DisposalSaddle CreekSaddle CreekFlippen - DisposalFlippen - Disposal

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AGolden Gate 129-108 #1H
  • BPatron 108 #1
FormationAB
Coleman Junction-1,120 MD 3,175COLEMAN JUNCTION - CORROSIVE; PO-1,210 MD 3,300
Coleman Junction—-1,210 MD 3,300
Noodle Creek—-1,740 MD 3,830
Noodle Creek - Disposal-1,760 MD 3,815-1,740 MD 3,830
Saddle Creek - Disposal—-2,010 MD 4,100
Saddle Creek-2,035 MD 4,090SADDLE CREEK - DISPOSAL-2,010 MD 4,100
Flippen - Disposal-2,125 MD 4,180-2,132 MD 4,222
Flippen—-2,132 MD 4,222
Canyon—-3,085 MD 5,175CANYON SAND
Crystal Falls - Disposal-3,315 MD 5,370—
Strawn—-3,870 MD 5,960
Ellenburger—-4,720 MD 6,810

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.