TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.9 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-2,000-4,000-6,000-8,000-10,000SUBSEA FTA636 FT ELB631 FT ELWilcoxWilcoxMidwayMidwayEscondidoEscondidoNavarroNavarroOlmosOlmos

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ADarlene 1-STX #N731HP
  • BMello 308-STX #A311W
FormationAB
Wilcox-380 MD 1,016-699 MD 1,330
Midway-2,831 MD 3,467-2,879 MD 3,510
Escondido-3,093 MD 3,729-3,154 MD 3,785
Navarro-3,409 MD 4,045-3,309 MD 3,940
Olmos-4,224 MD 4,860-4,184 MD 4,815
San Miguel-4,625 MD 5,261—
Acho Unc-5,107 MD 5,743—
Anacacho-5,470 MD 6,106—
Austin Chalk-5,861 MD 6,497AUSTIN CHALK - H2S—
Eagle Ford-6,235 MD 6,871—
Eagle Ford - H2S-6,235 MD 6,871—
Buda-6,382 MD 7,018—
Buda - H2S-6,382 MD 7,018—
Del Rio-6,491 MD 7,127—
Georgetown - H2S-6,570 MD 7,206—
Georgetown-6,570 MD 7,206—
Edwards-7,000 MD 7,636—
Glen Rose-7,459 MD 8,095—
Pearsall-9,257 MD 9,893—
Bexar-9,376 MD 10,012—
Middle Bexar-9,467 MD 10,103—
Lower Bexar-9,559 MD 10,195—
Cow Creek-9,729 MD 10,365—
Pine Island-9,803 MD 10,439—

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.