TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-2,000-4,000-6,000-8,000SUBSEA FTA552 FT ELB552 FT ELEscondidoEscondidoNavarroNavarroOlmosOlmosAnacachoAnacachoAustin ChalkAustin ChalkEagle FordEagle FordBudaBudaGeorgetownGeorgetownPearsallPearsall

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • APendleton-STX-Unit #N733H
  • BPendleton-STX-Unit #N735H
FormationAB
Escondido-2,961 MD 3,513-2,956 MD 3,508
Navarro-3,138 MD 3,690-3,128 MD 3,680
Olmos-3,961 MD 4,513-3,958 MD 4,510
Anacacho-5,076 MD 5,628-5,080 MD 5,632
Austin Chalk-5,413 MD 5,965AUSTIN CHALK - H2S-5,402 MD 5,954AUSTIN CHALK - H2S
Eagle Ford-5,798 MD 6,350EAGLE FORD - H2S-5,749 MD 6,301EAGLE FORD - H2S
Buda-5,876 MD 6,428BUDA - H2S-5,866 MD 6,418BUDA - H2S
Georgetown-6,053 MD 6,605GEORGETOWN - H2S-6,046 MD 6,598GEORGETOWN - H2S
Pearsall-8,656 MD 9,208-8,625 MD 9,177

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.