WELLS · CROSS-SECTION
2 wells, measured depth
West to east, 0.1 miles end to end. Shown in measured depth because not every well reports an elevation, so the columns are not datum-aligned. Dashed lines join the same normalized formation in neighbouring wells; nothing is interpolated. Where tops come from →
reported topsame formation, neighbouring wells
The tops, as filed
AWest Seminole SA Unit #701 42-165-00633
OXY USA WTP LP · Gaines · no elevation on file · 6,000 ft TD
| Formation | MD ft | Subsea |
|---|---|---|
| Rustler | 2,022 | — |
| Queen | 3,878 | — |
| San Andres | 4,597 | — |
BWest Seminole San Andres Unit #714 42-165-32299
OXY USA WTP LP · Gaines · 3,429 ft elevation · 6,000 ft TD
| Formation | MD ft | Subsea |
|---|---|---|
| YatesYATES - OVERPRESSURE, INERT GAS | 2,930 | 499 |
| Yates | 2,930 | 499 |
| Seven Rivers | 3,568 | -139 |
| Queen | 4,233 | -804 |
| San AndresSAN ANDRES - ACTIVE CO2 FLOOD | 4,617 | -1,188 |
| San Andres | 4,741 | -1,312 |
About this data
Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity and location from the permit record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.
New to these records? completion reports and the wellbore file
Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.