TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 1.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

2,000-0-2,000-4,000-6,000SUBSEA FTA25 FT ELB2,677 FT ELClear ForkClear ForkSpraberrySpraberry

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ASherminator 12-13 C #6WD
  • BHubbard #1
FormationAB
Redbeds—2,252 MD 425
Yates-1,716 MD 1,741—
San Andres-2,631 MD 2,656SAN ANDRES - HIGH FLOWS, H2S, CO—
Grayburg-3,045 MD 3,070—
Clear Fork-4,531 MD 4,556-1,893 MD 4,570
Dean—-4,913 MD 7,590
Wolfcamp—-5,098 MD 7,775
Strawn—-7,165 MD 9,842
Spraberry-7,174 MD 7,199-3,503 MD 6,180UPPER SPRABERRY

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.