TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.3 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000SUBSEA FTA2,715 FT ELB2,713 FT ELSanta RosaSanta RosaYatesYatesSeven RiversSeven RiversQueenQueenGlorietaGlorietaGrayburgGrayburgSan AndresSan AndresClear ForkClear ForkSpraberrySpraberryWichita-AlbanyWichita-Albany

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AHarris-Cook 60 #206HL
  • BHarris-Hutchison 50 #105HB
FormationAB
Santa Rosa1,840 MD 8751,596 MD 1,117
Yates427 MD 2,2881,456 MD 1,257
Seven Rivers170 MD 2,5451,257 MD 1,456
Queen-525 MD 3,240949 MD 1,764
Grayburg-750 MD 3,465-144 MD 2,857
San Andres-1,180 MD 3,895SAN ANDRES - HIGH FLOWS, H2S, CO-984 MD 3,697SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-2,170 MD 4,885154 MD 2,559
Clear Fork-3,555 MD 6,270-2,951 MD 5,664
Spraberry-4,165 MD 6,880-3,941 MD 6,654
Wichita-Albany-4,685 MD 7,400WICHITA ALBANY-4,649 MD 7,362WICHITA ALBANY

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.