TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000-5,000SUBSEA FTA2,713 FT ELB2,713 FT ELSanta RosaSanta RosaYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberry

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ACalverley B-Reed 30 #303HB
  • BCalverley B-Reed 50 #205HL
FormationAB
Santa Rosa1,838 MD 8751,838 MD 875
Yates472 MD 2,241471 MD 2,242
Seven Rivers220 MD 2,493171 MD 2,542
Queen-460 MD 3,173-458 MD 3,171
Grayburg-1,091 MD 3,804-711 MD 3,424
San Andres-1,238 MD 3,951SAN ANDRES - HIGH FLOWS, H2S, CO-1,172 MD 3,885SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-1,994 MD 4,707-2,075 MD 4,788
Clear Fork-3,492 MD 6,205-3,528 MD 6,241
Spraberry-4,102 MD 6,815-4,665 MD 7,378
Wichita-Albany-4,687 MD 7,400WICHITA ALBANY—
Lower Spraberry Shale—-5,045 MD 7,758

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.