TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.6 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

2,0001,000-0-1,000-2,000-3,000SUBSEA FTA2,687 FT ELB2,687 FT ELSanta RosaSanta RosaYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberryWichita-AlbanyWichita-Albany

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AOna 44-3 D #241
  • BYellow Rose 40-2 (Alloc-A) #1SM
FormationAB
Santa Rosa2,245 MD 4422,245 MD 442
Yates1,165 MD 1,5221,165 MD 1,522
Seven Rivers841 MD 1,846841 MD 1,846
Queen478 MD 2,209478 MD 2,209
Grayburg-248 MD 2,935296 MD 2,391
San Andres-927 MD 3,614SAN ANDRES - HIGH FLOWS, H2S, CO133 MD 2,554SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-1,840 MD 4,527-940 MD 3,627
Clear Fork-2,224 MD 4,911-2,576 MD 5,263
Spraberry-3,345 MD 6,032-3,306 MD 5,993
Wichita-Albany-3,840 MD 6,527WICHITA ALBANY-3,840 MD 6,527WICHITA ALBANY

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.