TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.5 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

1,000-0-1,000-2,000-3,000-4,000SUBSEA FTA2,697 FT ELB2,653 FT ELSanta RosaSanta RosaYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberryWichita-AlbanyWichita-Albany

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ALpi-Driver 33-28 (Alloc-D) #4NU
  • BLpi-Driver 33-28 (Alloc-H) #8NU
FormationAB
Santa Rosa1,983 MD 7141,939 MD 714
Yates938 MD 1,759938 MD 1,715
Seven Rivers834 MD 1,863833 MD 1,820
Queen483 MD 2,214478 MD 2,175
Grayburg378 MD 2,319334 MD 2,319
San Andres127 MD 2,570SAN ANDRES - HIGH FLOWS, H2S, CO135 MD 2,518SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-826 MD 3,523-870 MD 3,523
Clear Fork-2,151 MD 4,848-2,195 MD 4,848
Spraberry-3,238 MD 5,935-3,214 MD 5,867
Wichita-Albany-4,364 MD 7,061WICHITA ALBANY-4,333 MD 6,986WICHITA ALBANY

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.