TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.4 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

2,0001,000-0-1,000-2,000-3,000-4,000-5,000SUBSEA FTA2,704 FT ELB2,707 FT ELSanta RosaSanta RosaYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberry

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ACalverley 37-36 #109LH
  • BCalverley 37-36 #105LH
FormationAB
Santa Rosa2,211 MD 4932,214 MD 493
Rustler1,338 MD 1,366—
Yates529 MD 2,175532 MD 2,175
Seven Rivers229 MD 2,475232 MD 2,475
Queen-307 MD 3,011-304 MD 3,011
Grayburg-1,307 MD 4,011-1,304 MD 4,011
San Andres-1,463 MD 4,167SAN ANDRES - HIGH FLOWS, H2S, CO-1,460 MD 4,167SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-1,786 MD 4,490-1,783 MD 4,490
Clear Fork-3,429 MD 6,133-3,426 MD 6,133
Spraberry-3,960 MD 6,664-3,957 MD 6,664
Wichita-Albany—-4,951 MD 7,658WICHITA ALBANY

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.