TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

2,0001,000-0-1,000-2,000-3,000-4,000SUBSEA FTA2,709 FT ELB2,709 FT ELSanta RosaSanta RosaRustlerRustlerYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberry

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • ACalverley B-Reed 60 #104HD
  • BCalverley B-Reed 50 #103HD
FormationAB
Santa Rosa1,980 MD 7292,025 MD 684
Rustler1,243 MD 1,4661,238 MD 1,471
Yates487 MD 2,222489 MD 2,220
Seven Rivers276 MD 2,433272 MD 2,437
Queen-471 MD 3,180-460 MD 3,169
Grayburg-1,034 MD 3,743-1,039 MD 3,748
San Andres-1,163 MD 3,872SAN ANDRES - HIGH FLOWS, H2S, CO-1,177 MD 3,886SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-2,354 MD 5,063-2,366 MD 5,075
Clear Fork-3,512 MD 6,221-3,519 MD 6,228
Spraberry-4,099 MD 6,808-4,110 MD 6,819

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.