TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, under 0.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

2,0001,000-0-1,000-2,000-3,000-4,000SUBSEA FTA2,693 FT ELB2,694 FT ELSanta RosaSanta RosaRustlerRustlerYatesYatesSeven RiversSeven RiversQueenQueenGrayburgGrayburgSan AndresSan AndresGlorietaGlorietaClear ForkClear ForkSpraberrySpraberry

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AMcDaniel B-Chriesman 30 #103HA
  • BPickle Rick C #303HD
FormationAB
Santa Rosa1,832 MD 8612,257 MD 437
Rustler1,297 MD 1,3961,253 MD 1,441
Yates515 MD 2,178521 MD 2,173
Seven Rivers251 MD 2,442335 MD 2,359
Queen-340 MD 3,033-236 MD 2,930
Grayburg-820 MD 3,513-644 MD 3,338
San Andres-914 MD 3,607SAN ANDRES - HIGH FLOWS, H2S, CO-915 MD 3,609SAN ANDRES - HIGH FLOWS, H2S, CO
Glorieta-1,825 MD 4,518-1,703 MD 4,397
Clear Fork-3,434 MD 6,127-3,273 MD 5,967
Spraberry-3,983 MD 6,676-3,975 MD 6,669

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.