TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 0.6 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-2,000-4,000-6,000-8,000-10,000SUBSEA FTA412 FT ELB428 FT ELPecan GapPecan GapBMABMARodessaRodessaPettitPettitTravis PeakTravis PeakCotton ValleyCotton ValleyTaylorTaylor

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AClemens 'E' #3
  • BClemens 'G' #5
FormationAB
Pecan Gap-2,388 MD 2,800-2,392 MD 2,820
Goodland—-3,652 MD 4,080
Glen Rose—-3,752 MD 4,180
BMA-6,448 MD 6,860-6,415 MD 6,843
Rodessa-6,554 MD 6,966-6,496 MD 6,924
Pettit—-7,096 MD 7,524
Pettit-7,148 MD 7,560-7,096 MD 7,524
Travis Peak-7,328 MD 7,740-7,238 MD 7,666
Cotton Valley-10,296 MD 10,708-10,246 MD 10,674
Taylor-10,296 MD 10,708TAYLOR COTTON VALLEY-10,246 MD 10,674TAYLOR (CV)

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.