TOOLS · CROSS-SECTION · TEXAS

2 wells, subsea datum

West to east, 1.1 miles end to end. Subsea datum.

How to read it →

Each column is a well, lettered in the order drawn: west to east when every well has a location, or the order you list them (drag a well in the list, or switch to "As listed"). A well with no tops filed is listed but not drawn.

Under the subsea datum depths are elevation minus measured depth, so tops line up regardless of surface terrain; a value above zero sits above sea level. When not every well reports an elevation the section is in measured depth and the columns are not datum-aligned.

Each formation filed in more than one well has its own color, joined between neighboring wells and shaded down to the next formation both filed. Nothing is interpolated.

Where tops come from →

Section · 2 wells drawn

-0-2,000-4,000-6,000-8,000-10,000SUBSEA FTA403 FT ELB360 FT ELPecan GapPecan GapGoodlandGoodlandGlen RoseGlen RoseMassive Anhydrite (mark…Massive Anhydrite (marker)RodessaRodessaPettitPettitTravis PeakTravis Peak

shaded: a formation down to the next one filed in both wellsfiled in one well onlypoint at or tap a top to read it

Tops by well

Subsea feet, with measured depth beneath; the name as filed where it differs; a dash where the well has no top filed for the formation.

  • AMcLendon-Combest 'F' #12
  • BStone, E.E. 'A' #4
FormationAB
Pecan Gap-2,427 MD 2,830-2,480 MD 2,840
Goodland-3,557 MD 3,960-3,220 MD 3,580
Glen Rose-3,597 MD 4,000-3,460 MD 3,820
Massive Anhydrite (marker)-6,147 MD 6,550MASSIVE ANHYDRITE-6,371 MD 6,731BASE MASSIVE ANHYDRITE
BMA—-6,371 MD 6,731
Rodessa-6,405 MD 6,808-6,420 MD 6,780
Pettit-7,067 MD 7,470-7,067 MD 7,427
Travis Peak-7,237 MD 7,640-7,220 MD 7,580
Cotton Valley—-8,690 MD 9,050
C.V. Sand—-10,280 MD 10,640
C.V. Lime—-11,138 MD 11,498

About this data

Formation tops and elevations from the RRC dbf900 wellbore file (completion filings), names normalized to the formations registry; well identity from the permit record, location from the shared well record. Subsea is elevation minus measured depth. Nothing between filed tops is estimated.

New to these records? completion reports and the wellbore file

Developers: this page as JSON is GET /v1/data/cross-section, documented in the API reference.